Demonstration - Samsung SCD33 Owner's Instruction Manual

ENGLISH
Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions
that are included with your camcorder so that you may use
them more easily.
The DEMONSTRATION function may only be used in the CAM
mode without a tape inserted in the camcorder.
The demonstration operates repeatedly until the
DEMONSTRATION mode switched OFF.
1. Set the camcorder to CAM mode.
2. Press the MENU button.
The menu list will appear.
3. Move the MENU SELECTOR to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and
push the MENU SELECTOR.
5. To activate the DEMONSTRATION, set
DEMONSTRATION ON.
Press the menu button to quit the menu.
The demonstration will begin.
6. To end the DEMONSTRATION, set the
DEMONSTRATION to OFF.
Notes
The DEMONSTRATION function only works without
a TAPE installed.
The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to
the CAM mode (no tape is inserted in the camcorder).
If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops
temporarily and resumes 10 minutes later if you do not operate
any other functions.
While setting the NITE PIX to ON, the DEMONSTRATION function
does not work.
CAM MODE
INITIAL CLOCK SET
CAMERA
WL. REMOTE
A/V
BEEP SOUND
MEMORY
SHUT. SOUND
VIEWER
DEMO
CAM MODE
INITIAL SET
CLOCK SET
WL.REMOTE
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION
41 41