Preventative Maintenance; General - Dean SM35 Installation & Operation Manual

DEAN MILLIVOLT SERIES GAS FRYERS (NON-CE)
CHAPTER 5: PREVENTATIVE MAINTENANCE

5.1 General

Never attempt to clean the fryer during the cooking process or when the frypot is
filled with hot oil/shortening. If water comes in contact with oil/shortening heated to
cooking temperature, it will cause spattering of the oil/shortening, which can result
Any equipment works better and lasts longer when maintained properly and kept clean. Cooking
equipment is no exception. Dean millivolt gas fryers should be kept clean during the working day
and thoroughly cleaned at the end of each day. Below are recommendations for daily, weekly and
periodic preventative maintenance.
5.1.1 Daily
Use a commercial grade cleaner formulated to effectively clean and sanitize food-
contact surfaces. Read the directions for use and precautionary statements before
use. Particular attention must be paid to the concentration of cleaner and the length
of time the cleaner remains on the food-contact surfaces.
A. Remove and wash all removable parts.
B. Clean all exterior surfaces of the cabinet. Do not use cleaners, steel wool, or any other
abrasive material on stainless steel.
C. Filter the cooking oil and replace if necessary. The oil should be filtered more frequently
when under heavy use.
5.1.2 Weekly
A. Completely drain the oil from the fryer into a metal stockpot of sufficient size to safely hold
the entire contents of the frypot for disposal. Do not use a glass or plastic container.
B. Clean the frypot by following boil-out procedures in Chapter 4-2.
Never allow water to boil down and expose the heating tubes. Frypot damage will
DANGER
in severe burns to nearby personnel.
WARNING
WARNING
result.
5-1