Table of Contents
Advertisement
Notes:
1. Only applicable when TXC has been configured as an INPUT.
2. Only applicable when TXC has been configured as an OUTPUT.
3. MIN value not tested.
4. Parameter calculated from other parameters.
5. Clock period must correlate to data rate as specified in DR bits of TCR30. Note that data rate is a function of DR and T CLKIN and
CLKGT20 bit of MIR9.
6. The values for these parameters are given for the case with CLKP = 0 (TCR2[4:0]). For nonzero values of CLKP, use the
following formulas:
If CLKGT20 = 0 (MIR9[7]),
If CLKGT20 = 1 (MIR9[7]),
7. Values given are for data rate of 2Mb/s. For other data rates,
T TXC is 1/DR, where DR = data rate in Hertz,
T CLTX is 60% of T TXC minus T TXHL ,
T CHTX is 40% of T TXC minus T TXHL ,
T TXCO is 1/DR, where DR = data rate in Hertz,
T CLTXO is 60% of T TXCO minus T TXHLO ,
T CHTXO is 40% of T TXCO minus T TXHLO ,
T TXHLO is 15 ns, regardless of DR value,
T TXLHO is 15 ns, regardless of DR value.
8. Parameter not included in the production test.
P R E L I M I N A R Y
t RXDS min = 110–CLKP X T CLKIN
t RXDH min = 10+CLKP X T CLKIN
t RXDS min = 110–CLKP X T CLKIN X 2
t RXDH min = 10+CLKP X T CLKIN X 2
Am79C930
AMD
143
Advertisement
Table of Contents
