Using The Created Setup Disk For Installation - Xerox DocuPrint C1618 Operation Manual

3.1 Installing the Printer Driver with the Same Settings to Multiple Computers
3.1.2
Using
Installation
Use the setup disk created in "3.1.1 Creating a Setup Disk" and install the printer
driver to a computer. Here, we will use the setup disk created on a floppy disk as an
example.
The setup disk can only be used on the OS on which the disk was created or computers
running the same OS. Use the setup disk that suits the type of OS in use.
Procedure
For Windows NT 4.0/Windows 2000/Windows XP, log on as a user of the administrator
3 G
group or as the administrator.
If the printer driver is installed to the printer setup in a NetWare environment, log on to the
G
corresponding NetWare server, then begin the installation.
1
If a virus-check software has been installed, either uninstall it or switch
it off.
2
Insert the setup disk into the floppy disk drive.
3
Click Run from the Start menu. The Run dialog box will be displayed.
4
Enter the drive, followed by a colon ":", and "\setup.exe". Click OK.
Example: A is the drive name. "A:\setup.exe"
The Driver Installation Confirmation dialog box is displayed.
5
When you want to set this printer as the default printer, check Make
this the default printer.
32
the Created Setup Disk for