Replacing The Adf Pad Assembly - Xerox DocuMate 4830 User Manual

Replacing the ADF Pad Assembly

The ADF pad may wear out and is designed to be a user-replaceable part. Problems with
documents feeding into the ADF is an indication that the pad is wearing out.
Discard the parts as you remove them from the scanner, the parts cannot be reused and are a
choking hazard.
1. Open the ADF cover. The ADF pad is located on the top of the duplex lamp module.
2. Squeeze the plastic clamp that holds the pad assembly in place.
3. Lift the pad up and out of the scanner.
4. Remove the tension spring that is located under the ADF pad.
178 Xerox DocuMate 4830
User's Guide