Open Scanned Document(S) - Xerox DocuMate 3115 User Manual

Open Scanned Document(s)

Select the destination

Open Scanned Document(s)

when scanning is complete.
—all file formats are available when scanning to the Open Scanned Document(s)
Supported file types
destination. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Text Formats
installed.
—the Open Scanned Document(s) destination is classified as a "Document
Destination type
Management Link". To make it available in the destination list, you must select
on the Options tab in the OneTouch Properties window.
Technical Note
• If there is no application installed for the file format you selected, the OneTouch Link Log Viewer
will open when scanning is finished showing the failure. You can double-click on the log failure to
open the detail view of the failed transfer.
For example, if you select
the file.
Either install an application for that file type, or associate an application in the Windows Explorer
folders option, please refer to your Windows documentation for instructions on associating file
types.
• When scanning to multiple destinations, the scanned file is still sent to the other selected
destination application(s) in OneTouch.
78 ®
Xerox DocuMate
User's Guide
on page 74 to see a list of text file formats that are available when OCR is
as the file type a PDF viewer application must be installed to open
PDF
®
3115
to have the scanned document open automatically
Document management