Xerox DocuMate 3115 User Manual page 120

6. Select the scan configuration you want to use for scanning in the
Click on the button to open the Scan Configuration Properties window to configure any
Edit
destination specific scanning options.
Each destination that has per-scan configuration properties will be represented by its
configuration tab in the OneTouch Scan Configuration Properties window. Please refer to the
destination instructions, as described in the previous section(s), for configuring destination
specific options.
Click on when you are done making changes in this window.
OK
7. Click on on the OneTouch Properties window.
OK
8. Load the document(s) in the scanner and start scanning with the button you set to scan to
multiple destinations.
The scanner starts scanning and when finished, the image is sent to each destination you selected in
the OneTouch Properties window.
Technical Note
• The
Still Image Client
destination will be disabled when the
120 ®
Xerox DocuMate
User's Guide
destination cannot be used with multiple destination scanning. This
Enable scanning to multiple destinations
®
3115
list.
Select configuration
is selected.