Switching Print Languages; Mode Menu Screen - Xerox DocuPrint C3055 DX Settings Manual

Switching Print Languages

The printer supports multiple emulation modes and can switch between multiple print
languages.
There are three methods of switching print languages.
Switching Languages by Commands
If the printer receives a command that explicitly tells which language to use, the printer
switches to that language.
Switching Languages Automatically
The printer examines data received by its host interface and automatically determines and
switches to the appropriate language.
Switching Languages by Interface
The printer can be programmed to switch to a particular language for a particular host
interface. This can be done by setting a language for each interface on the control panel.

Mode Menu Screen

The menu items for the emulation modes can be accessed from the mode menus. To
access the mode menu for the ESC/P emulation mode, press the <Menu> button and select
[Print Language] > [ESC/P]. The following is the first screen of the ESC/P mode menu.
Refer to
• For information about the items under the ESC/P mode menu, refer to "2 Setting the ESC/P Mode" (P.
12).
8
1 Using Emulation