Document Size; Output Color; Zoom Mode - Xerox DocuPrint C3055 DX Settings Manual

Document Size

Sets the size and orientation of the document to be printed.
The following options are available:
[Portrait] (default)
[Landscape]
[A4 Portrait], [A4 Landscape], [A3 Portrait], [A3 Landscape], [A5 Portrait], [A5 Landscape],
[B4 Portrait]
[B4 Landscape], [B5 Portrait], [B5 Landscape], [100 x 148mm P], [100 x 148mm L]
[11x17 Portrait], [11x17 Landscape]
[8.5x14 Portrait], [8.5x14 Landscape]
[8.5x13 Portrait], [8.5x13 Landscape]
[8.5x11 Portrait], [8.5x11 Landscape]
[R15x12 Landscape] (continuous form paper: 15 x 12; 136 columns/72 rows)
[R15x11 Landscape] (continuous form paper: 15 x 11; 136 columns/66 rows)
[R10x12 Portrait] (continuous form paper: 10 x 12; 80 columns/72 rows)
[R10x11 Portrait] (continuous form paper: 10 x 11; 80 columns/66 rows)
Note
• When [Zoom Mode] is set to [Fixed %] or [Whole Output Size], the printer automatically determines the
zoom ratio based on the [Document Size] and [Output Size] settings.
When [2 Pages Up] is enabled, the zoom ratio will be 1/2 of the zoom ratio determined from [Document
Size] and [Output Size].
• The paper orientation you select here is that of the document to be printed. The orientation will not affect
the orientation of the paper in the selected paper tray.
• When [Portrait] or [Landscape] is selected, [Document Size] will be the size specified for [Output Size].

Output Color

Sets the output color to [Color] (default) or [Black].
Quantity
Sets the number of copies to be printed within the range of 1 (default) to 250.
Note
• If the printer receives a job from a client that specifies the print quantity, that quantity will be applied to
the job. After the job is printed, the quantity set on the control panel also changes to the quantity
specified by the client. However, if the job is requested through a NetWare or LPD port, the quantity on
the control panel does not change to the quantity specified by the client.
• Holding down the < > or <
pressing the < > and <

Zoom Mode

Fixed % (default)
Automatically reduces or enlarges the document based on [Document Size] and [Output
Size] so that the printable area of [Document Size] fits into that of [Output Size]. If the sizes
specified for [Document Size] and [Output Size] are the same, the document will be printed
at 100% zoom ratio. When [2 Pages Up] is enabled, two pages will be printed onto the
printable area of one page.
Variable %
Allows you to set the desired zoom ratio. You can set different zoom ratios for X and Y
directions within the range of 45 to 210% in increments of 1%. The default is [P 100% L
100%].
> button scrolls through the options in a circular fashion. Simultaneously
> buttons displays the default value.
2.2 Setting the ESC/P Mode Menu
15