When all of your connections are made, your network may look like this:
Rear View
USB
Ethernet
Port
Ports
(not used)
Broadband Port
Power Switch
DC Power
Cable Modem,
DSL Modem, or
Fiber-optic media converter
4. Enable Wireless Protected Setup (WPS) on your Wi-Fi devices.
Adding wireless clients to your network is easier using Wireless Protected Setup (WPS). Older,
non-WPS clients can still be added to the network by configuring them the standard way with
WPA-PSK.
Make sure your wireless clients are running. Press the WPS push-button to begin the exchange,
which may last up to two minutes.
Do not power off your Gateway during the exchange.
The Gateway will display a success message when the exchange has completed.
Note: Not all client wireless devices support WPS. Refer to their documentation.
5