Component Video (Ypbpr); Audio - Motorola DCX3300 User Manual

Connecting Your Set-top
Note: A DVI connection supports only the video connection between the set-top and the
HDTV.
To connect your audio connections with your TV speakers, go to Audio section below.
To connect your audio connections for an A/V receiver, go to Connecting Your Set-top to
an A/V Receiver — Audio.

Component Video (YPbPr)

Connect the component video cables to the Y, Pb, and Pr connectors on your HDTV and
set-top.
Note: This connection supports only the high-definition video connection between the
set-top and the HDTV.
Note: Be sure to match up each signal to the same connection on the TV, otherwise the
colors will not appear correctly on your TV.
To connect your audio connections with your TV speakers, go to the Audio section
below.
To connect your audio connections for an A/V receiver, go to Connecting Your Set-top to
an A/V Receiver — Audio.

Audio

If your TV does not have digital audio inputs, connect the stereo audio cable to the audio
L/R connectors on the DCX3300 set-top and the Audio L/R connectors on the HDTV.
If your TV supports digital audio inputs, use the digital audio optical S/PDIF output
instead of the audio L/R outputs. S/PDIF offers better audio quality, including support for
®
Dolby Digital audio.
For information on configuring your set-top settings, go to Configuring the Audio, Video,
and Closed Caption Settings.
DCX3300 High-Definition Dual Tuner / External DVR Set-top • User Guide
365-095-14427 x.2
B
12