Installing Wireless Connection 3
To download the software from the CASIO website and install it
1.
Visit the CASIO website (page 9) and download "Wireless Connection 3" to your
computer.
2.
Double-click the file you downloaded.
Follow the instructions that appear on your computer screen.
To install from the CD-ROM (that comes with some projector
models)
1.
Place the CD-ROM into your computer's CD-ROM drive.
2.
On the menu that appears, click the [Install] button to the right of "Wireless
Connection 3".
Follow the instructions that appear on your computer screen.
Important!
If you are running Windows 7 and the "User Account Control" message appears while
installing, click [Yes].
If you are running Windows Vista and the "User Account Control" message appears while
installing, click [Allow].
If you are running Windows XP and the message shown below appears while installing, click
[Continue Anyway].
Note
After you install Wireless Connection 3, it will start up automatically and start searching for a
projector. If you want to establish a wireless LAN connection between the computer and
projector at that time, perform the procedure under "To use a default SSID to connect a
computer to the projector via wireless LAN" (page 16). If you do not want to establish a
connection, click the close button in the upper right corner of the Wireless Connection 3 window.
10