Configuring Wireless Settings - Casio XJ-H1650 Function Manual

Configuring Wireless Settings

You can use the projector's setup menu to configure the Wireless function settings described below.
Setting Name
Change wireless connection
Wireless info
Initialize Network Settings
Note
More advanced projector wireless LAN connection settings (connection setup, security settings,
etc.) can be configured using the System Admin page, which can be accessed from the
computer currently connected to the projector via wireless LAN. For more information, see
"System Admin Page Operations and Settings" (page 34).
To switch between default SSIDs
Important!
This procedure can be used only to change from one default SSID to another default SSID. If the
current SSID or the SSID being changed to is not one of the six default SSIDs, use the
projector's System Admin page to change the SSID. For details, see "To configure projector's
network settings and wireless LAN connection settings" (page 36).
1.
While the Wireless screen is being projected, press the [MENU] key.
2.
Use the [ ] key to move the highlighting to "USB" and then press the [ENTER]
key.
Switches the projector's SSID setting from one of the six default SSIDs to another.
Displays the projector's current SSID, login code, and other information.
Returns all network settings to their initial factory defaults.
31
Description