About the Projector's Wireless Application
Wireless is one of the projector's built-in applications. It makes it possible to establish a wireless LAN
connection between the projector and a computer, and project the computer's display contents.
To perform wireless projection
Press the [INPUT] key and select "USB" as the input source. This will enable wireless projection.
The Wireless standby screen will be projected if there is no wireless LAN connection between the
projector and a computer.
Wireless Standby Screen
The Wireless standby screen displays the information described below.
For information about the meaning of SSID, IP address, and other terms used above, see "System
Admin Page Settings" (page 38).
This is a four-digit number that must be input when establishing a wireless LAN
connection between the projector and a computer under default Wireless settings.
The number is updated to a new one whenever the projector is started up.
Projector's current SSID.
Projector's current IP address.
Projector's current channel number.
Projector's current security setting.