Casio XJ-H1650 Function Manual page 32

3.
Use the [ ] key to move the highlighting to "Change wireless connection" and
then press the [ENTER] key.
This displays a dialog box like the one shown below for changing the wireless connection.
Each of the connection names that appear on the dialog box corresponds to an SSID as
shown below.
Connection Name
Wireless Connection 1
Wireless Connection 2
Wireless Connection 3
MobiShow Connection 1
MobiShow Connection 2
MobiShow Connection 3
For details about MobiShow connection, see "Projecting from a Terminal with MobiShow
Installed" (page 42).
4.
Use the [ ] and [ ] keys to move the highlighting to the connection name you
want to select and then press the [ENTER] key.
This will cause a "Do you want to change the wireless connection?" confirmation dialog box to
appear.
5.
Press the [ ] key to move the highlighting to "Yes" and then press the [ENTER]
key.
The wireless connection needs to be restarted in order to reflect the change, which will cause
the projected image to go blank. It may take a little time before the wireless screen is
projected again.
To display wireless information
1.
While the Wireless screen is being projected, press the [MENU] key.
2.
Use the [ ] key to move the highlighting to "USB" and then press the [ENTER]
key.
SSID
casiolpj_default1
casiolpj_default2
casiolpj_default3
casiolpj_mobishow1
casiolpj_mobishow2
casiolpj_mobishow3
32