Intercom Operation; Communication - Standard Communications Horizon GX2335S NOVA+ Owner's Manual

USA/ INTL/ CAN Indicator
The mode of operation. "USA" indicates USA mode. "INTL" indicates
International mode and "CAN" indicates Canadian mode.
WX Indicator
A weather channel.
MEM Indicator
The channel is in the transceiver's scan memory.
H/L Indicator
"H" is high power. "L" is low power. Blank is a reception only channel.
SQL/VOL Indicator
"SQL" is squelch adjusting mode. "VOL" is volume adjusting mode.

6.3 INTERCOM OPERATION

6.3.1 Communication

1. Press the IC key in the radio mode. The mode is changed to the
INTERCOM mode. If the IC key is pressed again the mode will revert
to radio mode.
2. "IC" is displayed on both the transceiver and RAM Mic when the
intercom operation is activated.
3. Press the PTT switch. The "TX" indicator is displayed.
A warning beep is emitted when the RAM Mic PTT switch is pressed
while the transceiver microphone's PTT switch is pressed.
GX2335S
EXTERNAL
SPEAKER
MIC
16/9 WX
LAMP
IC
CALL
SUBMERSIBLE
RAM Mic
NOTE
Owner's Manual
External speaker acts as RAM
Mic's speaker when the RAM
Mic is connected.
SCAN A/B
H/L
page 25