Ram Mic Operation; Ram Mic Controls And Connections - Standard Communications Horizon GX2335S NOVA+ Owner's Manual

6
If the optional RAM Mic (CMP23) is connected to the remote microphone
connector on the transceiver's rear panel, then the transceiver can use the
remote control operation. The remote control has a maximum range of 50
feet (15 m). The intercom operation can be used between the RAM Mic
and the transceiver.

6.1 RAM MIC CONTROLS AND CONNECTIONS

POWER SWITCH (PWR)
Turns the transceiver on and off.
Press and hold down this switch for half a second or more to turn the power
on. Press and hold down this switch for half a second or more to turn the
power off .
SQUELCH KEY (SQL)
Activates the squelch adjusting mode.
Press this key to activate the squelch adjusting mode. Press the
key to adjust the squelch.
Sets the point at which random noise on the channel does not activate the
audio circuits but a received signal does. This point is called "squelch
threshold". Further adjustment of the squelch control by pressing the
key will degrade the reception of wanted transmissions.
When the key is pressed and held down for 1 second or more, the
squelch is turned off.
VOLUME KEY (VOL)
Activates the volume adjusting mode.
Press this key to activate the volume adjusting mode. Press the
key to adjust the volume.
PTT (Push-To-Talk) SWITCH
Activates transmission.
16/9 KEY
Immediately recalls channel 16 from any channel location. Hold down this
key for 1 second or more to recall channel 9. Recalls the previous channel
when 16/9 key is pressed again. When the WX key is pressed and this key
is pressed and held down, the mode toggles between USA, International
and Canadian.
page 22

RAM MIC OPERATION

Owner's Manual
or
or
GX2335S