Controls And Indicators; Controls And Connections - Standard Communications Horizon GX2335S NOVA+ Owner's Manual

4
This section defines each control of the transceiver. See Figure 6 for
location of controls. For detailed operation instructions refer to chapter
5 of this manual.

4.1 CONTROLS AND CONNECTIONS

q POWER SWITCH/VOLUME CONTROL
To turn the power on or off, press and hold this knob for 3 seconds,
and sets the audio volume. When power is turned on, the transceiver is
set to the priority channel.
Secondary Use
When the transceiver is turned on while the SCAN and WX keys are
held down, the internal microprocessor is reset. This clears memory
and all user-programmed settings, such as scan memory, priority scan
assignments, and A/B channel assignments. This condition is known as
the default condition, the same as when shipped from the factory. For a
list of these defaults, see the section on Resetting the Transceiver's
Microprocessor.
w SQUELCH CONTROL (SQL)
Sets the point at which random noise on the channel does not activate
the audio circuits but a received signal does. This point is called the
squelch threshold. Further adjustment of the squelch control will
degrade reception of wanted transmissions.
e CHANNEL SELECTOR KNOB
Rotary knob used to select channels. The CH key on the microphone
can also be used to select channels.
Secondary Use
While holding down the SCAN Key and rotating the rotary knob,
you can confirm memory channels for scanning.
p a g e 8

CONTROLS AND INDICATORS

NOTE
Owner's Manual GX2335S