Resetting The Transceiver's Microprocessor - Standard Communications Horizon GX2335S NOVA+ Owner's Manual

5.16 RESETTING THE TRANSCEIVER'S MICROPROCESSOR

Resetting the microprocessor restores the initial, factory supplied conditions
in the transceiver. These are called the default conditions. To reset the
microprocessor, first turn the transceiver off. Then while holding the WX and
SCAN keys pressed, turn the transceiver on. The default conditions are:
• No channel numbers are in memory.
• Channel 16 is the priority channel.
• Channel 16 will be selected when the transceiver is turned on.
• WX channel 01 will be recalled when the WX key is pressed.
• Channels A and B are unassigned.
• No voice scrambler code is selected.
GX2335S Owner's Manual page 21