Simplex/Duplex Channel Use; Usa, Canada, And International Mode; Weather Channels; Normal Scanning - Standard Communications Horizon GX2335S NOVA+ Owner's Manual

5.4 SIMPLEX/DUPLEX CHANNEL USE

Refer to the OWNER'S MANUAL SUPPLEMENT for instructions on use of
simplex and duplex channels.
All channels are factory-programmed in accordance with FCC (USA),
Industry Canada (Canada), and International regulations, Mode of
operation cannot be altered from simplex to duplex or vice-versa.

5.5 USA, CANADA, AND INTERNATIONAL MODE

1. To change the modes, hold the 16/9 key and press the WX key. The
mode changes from USA to International to Canada with each press of
the WX key.
2. "USA" will be displayed on the LCD for the USA mode, "INTL" will be
displayed for International mode, and "CAN" will be displayed for
Canadian mode.
3. Refer to the OWNER'S MANUAL SUPPLEMENT for allocated
channels in each mode.

5.6 WEATHER CHANNELS

1. To receive a weather channel, press the WX key from any channel.
The transceiver will go to the last selected WX channel.
2. Rotate the CHANNEL SELECTOR KNOB, or press the CH key on the
microphone to go to another weather channel.
3. To exit from the weather channels, press the WX key. The transceiver
returns to the channel it was on prior to a weather channel.

5.7 NORMAL SCANNING

1. Adjust the SQUELCH CONTROL just until background noise
disappears.
2. Select a desired channel to be scanned using the CH key or CHANNEL
SELECTOR KNOB. Press the MEM key to program the channel into the
transceiver's memory. "MEM" is displayed on the LCD.
3. Repeat step 2 for all the desired channels to be scanned.
4. To review channels programmed into scan memory, press and hold
the SCAN key and then rotate the channel selector knob. A
programmed channel will be displayed with each position change of
the channel selector knob.
GX2335S
NOTE
Owner's Manual page 15