Standard Communications Horizon GX2335S NOVA+ Owner's Manual page 12

r KEY PAD
16/9 Key
Immediately recalls channel 16 from any channel location. Holding
down this key recalls channel 9.
Secondary use
Please see secondary use for the WX key and the MEM key.
WX Key
Immediately recalls a weather channel from any channel.
Secondary use
1. Holding down the 16/9 key while pressing the WX key, changes the
mode from USA to International or Canadian.
2. Holding down the WX and SCAN key while turning the power on,
resets the microprocessor and erases scan channels from
memory. This clears the memory and establishes the factory-set
defaults. For a list of these defaults, see the section on Resetting the
Transceiver's Microprocessor.
SCAN Key
Starts and stops scanning programmed channels. Refer to normal
scanning and priority scanning of sections 5.8/5.9 for details of
operation. Neither scan will start if no channel has been stored in
memory. Look for MEM adjacent to the channel number to see if the
channel is in memory (also see MEM key).
IMPORTANT- There is only one priority channel. However, it can be
assigned as one of the following four channels: Ch 09, Ch 16, Ch A, or
Ch B. The priority channel is marked with a P on the LCD.
IC Key
The IC key operates when the optional RAM Mic connected. Refer to
section 6 for details of operation.
A/B Key
Immediately recalls two user assigned channels from any channel.
Secondary Use
1. Holding down the A/B key and pressing the MEM key, deletes the
displayed channel A or B.
2. Please see secondary use for Rotary knob.
page 10 Owner's Manual GX2335S