Install Remote Control Battery; Turn On - Philips CED1700 User Manual

‡ Since the unit cannot be used if the dashboard opening's
slant angle is above 20 degrees: Ensure that the horizontal
slant of the car dashboard opening is between 0 and 20
degrees.
3
Slide the unit into the dashboard until a click sound is heard.
4
Attach the trim plate.
5
Reconnect the negative terminal of the car battery.
12 EN

Install remote control battery

Caution
‡
5LVN RI H[SORVLRQ .HHS EDWWHULHV DZD\ IURP KHDW VXQVKLQH RU ÀUH 1HYHU GLVFDUG
EDWWHULHV LQ ÀUH
Note
‡
Remove batteries if they are exhausted or if the remote control is not to be used
for a long time.
‡
Batteries contain chemical substances, they should be disposed of properly.
‡
Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct polarity (+/-) as
indicated.
3
Close the battery compartment.

Turn on

Caution
‡
Risk of road accidents! Never watch video or adjust settings while you drive.
1
Press to turn on the unit.
» The available OSD (On-Screen Display) languages are
displayed.
2
Touch a language to select.
» The OSD language is changed to the selected language
immediately.
‡ To adjust screen brightness, press DIMMER on the remote
control, then press
‡ To turn off the unit, press and hold
or .
for 3 seconds.