Install the car audio
Ensure that all loose leads are insulated with
Check the car's wirings carefully, then make
the other connections.
Connect GPS antenna
To receive signal from satellites, connect the
supplied GPS antenna to your car and the
Connect the supplier GPS antenna to the
Stick the other end of the GPS antenna to a
metal surface of the car.
Mount in the dashboard
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
Ensure that the horizontal slant of the
car dashboard opening is between 0 and
20 degrees. The unit cannot be used if the
dashboard opening's slant angle is above
Install the supplied screen brackets and fix
the screen to the car.
Remove the disc loader from the host
car audio system and then install the disc
loader to the unit.
Install the mounting brackets to the unit
Slide the unit into the dashboard and fix it
to the car with four screws.
Reconnect the negative terminal of the car
Risk of road accidents! Never watch video or
adjust settings while you drive.
Press and hold /MUTE to turn on the
The available OSD (On-Screen Display)
languages are displayed.
Tap a language to select.
The OSD language is changed to the
selected language immediately.
To turn off the unit, press and hold
Set date and time
to display main menu.
The date/time setup menu is displayed.