Install Remote Control Battery - Philips CED1700/51 User Manual

‡ Since the unit cannot be used if the
dashboard opening's slant angle is
above 20 degrees: Ensure that the
horizontal slant of the car dashboard
opening is between 0 and 20 degrees.
3
Slide the unit into the dashboard until a
click sound is heard.
4
Attach the trim plate.
14 EN
5
Reconnect the negative terminal of the
car battery.

Install remote control battery

Caution
‡
Risk of explosion! Keep batteries away from
KHDW VXQVKLQH RU ÀUH 1HYHU GLVFDUG EDWWHULHV
LQ ÀUH
Note
‡
Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
‡
Batteries contain chemical substances, they
should be disposed of properly.
‡ Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.