Install Remote Control Battery; Turn On; Select Display Language - Philips CED228 User Manual

7
Slide the unit into the dashboard until a
click sound is heard.
8
Reconnect the negative terminal of the
car battery.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fi re. Never discard batteries
in fi re.
•
Risk of decreased battery life! Never mix
different brands or types of batteries.
•
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
•
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert 1 CR2025 batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
16 EN

Turn on

1
Press the knob to turn on the unit.
»
The unit plays the last listened
program: DVD, Tuner, USB or SD/MMC
Card (if there is USB device or SD/
MMC card connected).
• To turn off the unit, press the
more than 2 seconds.
• When the unit is idle for over 3 minutes,
it goes to standby mode and displays
screen saver.

Select display language

English is the default language for screen display.
You can change the display language.
1
Press MENU.
»
The main menu is displayed.
knob for