Get Started; Install The Car Audio - Philips CED1700 User Manual

o DVD MENU
‡ Access DVD main menu.
p DVD AUDIO
‡ Select audio language or audio channel.
q NAVI
‡ Enter/exit the navigation system.
r
‡ $GMXVW VKXIÁH SOD\ PRGH
s
‡ Start or pause play.
t
/RECEIVE
‡ Answer phone.
‡ Dial number.
u OK
‡ &RQÀUP VHOHFWLRQ
v
/
‡ Skip to previous/next track/chapter.
‡ Play fast backward/forward.
‡ Tune for radio station.
w
‡ Turn the unit on or off.
x
/
‡ Skip to the previous/next preset station.
‡ Skip to the previous/next folder.
‡ Search backward/forward for DVD video.
‡ Move cursor up/down.
8 EN

2 Get started

Caution
‡
Use of controls or adjustments or performance of procedures other than herein
may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.

Install the car audio

These instructions are for a typical installation. However, if your car
has different requirements, make the corresponding adjustment. If you
have any questions regarding installation kits, consult your Philips car
audio dealer.
Caution
‡
This unit is designed for negative ground (earth) 12 V DC operation only.
‡
Always install this unit in the car dashboard. Other locations can be dangerous as
the rear of the unit heats up during use.
‡
To avoid short-circuit: before you connect, ensure that the ignition is off.
‡
Ensure that you connect the yellow and red power supply leads after all other leads
are connected.
‡
Ensure that all loose leads are insulated with electrical tape.
‡
Ensure that the leads do not get caught under screws orin parts that will move (e.g.
seat rail).
‡
Ensure that all ground (earth) leads are run to a common ground (earth) point.
‡
Use only the supplied mounting hardware for a safe and secure installation.
‡
,PSURSHU IXVHV FDQ FDXVH GDPDJH RU ÀUH :KHQ \RX QHHG WR FKDQJH WKH IXVH
consult a professional.
Note on the power supply lead (yellow)
‡ When you connect other devices to this system, ensure that the
rating of the car circuit is higher than the total fuse value of all
the connected devices.
Notes on speaker connection
‡ Never connect speaker wires to the metal body or chassis of the
car.
‡ Never connect speaker wires with stripes to one another.