Philips CED1700 User Manual page 21

8 Others
Listen to other devices
You can connect an external audio/video device to the unit.
1
Connect the car audio to the device through the REAR OUT
L/R connector (see "Connect wires" section)
2
Touch to display the home menu.
3
Touch [AV-IN].
4
Operated the connected the device (see the instructions manual
of the device).
Reset
When the unit hangs up, you can reset it.
1
Press reset button on the lower right of the front panel with a
ball-point pen or similar tool.
Tip
‡
When the unit is reset, all the settings remain unchanged.
Remove the unit
To repair, replace fuse, or replace the unit with another car audio,
remove it from the dashboard.
1
Take off the trim plate.
2
Pull the unit out from the dashboard.
Replace fuse
If there is no power, the fuse may be damaged and need to be
replaced.
1
Take out the unit from dashboard.
2
Check the electric connection.
3
Buy a fuse that matches the voltage of the damaged fuse (15A)
4
Replace the fuse.
If the fuse gets damaged immediately after it has been replaced, there
may be an internal malfunction. In such case, consult your Philips
dealer.
EN 21