Alliance Laundry Systems 802749R2 Installation Instructions Manual
Alliance Laundry Systems 802749R2 Installation Instructions Manual

Alliance Laundry Systems 802749R2 Installation Instructions Manual

Alliance laundry systems frontload washers installation instructions

Advertisement

Quick Links

Installation Instructions

for Frontload Washers
Inside.....................................
Washer Dimensions...........................................................
Before You Start................................................................
Installation.........................................................................
Installer Checklist..............................................................
Date Purchased ________________
Model Number ________________
Serial Number _________________
Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com.
Keep these instructions for future reference.
(If this machine changes ownership, this manual must accompany machine.)
2
2
3
Back Cover
www.comlaundry.com
Part No. 802749R2
April 2012

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 802749R2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems 802749R2

  • Page 1: Installation Instructions

    Date Purchased ________________ Model Number ________________ Serial Number _________________ Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com. Keep these instructions for future reference. (If this machine changes ownership, this manual must accompany machine.) Part No. 802749R2 April 2012 www.comlaundry.com...
  • Page 2: Washer Dimensions

    Water is used during testing at the manufacturer. FLW2045N Safety Glasses NOTE: Install dryer before washer. This allows Wood Block room for attaching exhaust duct. Wrench Screwdriver Pliers Socket Wrench Level Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 3: Step 1: Position Washer Near Installation Area

    If washer is not level, tilt washer to access the front and rear leveling legs. Loosen the locknuts and adjust legs by screwing into or out of washer base. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 4: Step 3: Connect Fill Hoses

    No. 20618 Fill Hose 10 feet (3.05 m) 6 (1.6) 9.4 (2.5) 8.2 (2.2) 13 (3.4) 9.9 (2.6) 14.5 (3.8) 9.6 (2.5) 15.9 (4.2) 9.8 (2.6) 15.9 (4.2) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 5: Step 4: Connect Drain Hose To Drain Receptacle

    Water Faucets height) Cold Water Connection Standpipe - 2 in. (5.08 cm) or 1-1/2 in. (4 cm) Hot Water Connection Beaded Strap Fill Hoses Figure 6 Figure 5 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 6: Wall Installation

    NOTE: End of drain hose must not be below 24 in. hose. (61 cm). FLW1961N Drain Hose Beaded Strap (tape if necessary) H023I Drain Hose Figure 8 Beaded Strap (tape if necessary) Fill Hoses Figure 7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 7: Step 5: Remove The Shock Sleeves And Shipping Brace

    For leveling purposes, the washer may be tilted a maximum of 6 inches (152.4 mm) in any direction. FLW2271N FLW2271N Figure 11 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 8: Step 6: Wipe Out Inside Of Washer Drum

    Ensure an eye-rinse facility and an emergency shower are within easy reach. Check at regular intervals for chemical leaks. SW016 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 9: Control Function Test

    NO CONNECTION Figure 17 TERMINAL BLOCK NOTE: Normally Open Contacts. Contacts Close to Start Chemical Injection. Maximum Load Connection per Contact: 1A @ 120VAC/240VAC 801653R1 FLW2028N Figure 16 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 10: Step 9: Check Installation

    3-prong grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 802749...
  • Page 12: Installer Checklist

    Plain Washers CHECK FLW2054N FLW2162N Hot Valve Connection FLW2162N CHECK FLW2054N • Connect Drain • Plug in the Washer. Hose to Drain Receptacle. CHECK CHECK D254I D254I FLW1959N FLW1959N © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT...

Table of Contents