Alliance Laundry Systems 805413R1 Installation & Operation Manual
Alliance Laundry Systems 805413R1 Installation & Operation Manual

Alliance Laundry Systems 805413R1 Installation & Operation Manual

Advertisement

Frontload Washers
Metered Commercial
FLW1542C_SVG
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 805413R1
www.alliancelaundry.com
September 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 805413R1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alliance Laundry Systems 805413R1

  • Page 1 Frontload Washers Metered Commercial FLW1542C_SVG Original Instructions Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. 805413R1 www.alliancelaundry.com September 2014...
  • Page 3: Front Matter

    Always contact the distributor, service agent, or the manufacturer about any problems or conditions you do not understand. Read all instructions before using washer. This product uses FreeRTOS V7.2.0 (www.freertos.org). © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 4: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 5 Cleaning Glass Sealing Area..............20 Replacing Hoses..................20 Filter Screens.................... 20 Extended Non-Use..................20 Cleaning Foreign Object Trap..............20 Reinstallation of Shipping Materials............20 Troubleshooting..................22 Contact Information................24 Installer Checklist.................25 © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 6: Safety Information

    Use your washer only for its intended purpose, washing follow these basic precautions: clothes. Always follow the fabric care instructions supplied by the garment manufacturer. W023 © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 7 Always contact your dealer, distributor, service agent or the man- ufacturer about any problems or conditions you do not under- stand. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 8: Dimensions And Specifications

    1. 1.5 in. [38 mm] Inside Diameter; 1.86 in. [47 mm] Outside Diameter 24 in. [610 mm] 44.34 in. [1126 mm] 32 in. [813 mm] © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 9 26.875 in. [683 mm] 4.2 in. [107 mm] 4.1 in. [104 mm] 2.04 in. [52 mm] 27.73 in. [704 mm] 1.59 in. [40 mm] 13.1 in. [333 mm] © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 10: Installation

    NOTE: Some moisture in the wash drum is normal. Wa- ter is used during testing at the manufacturer. NOTE: This appliance is suitable for use in countries having a warm, damp climate. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 11: Order Of Installation Steps

    Refer to the Maintenace section for proper instructions on rein- stalling the shipping materials. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 12: Connect Fill Hoses

    This is especially im- supply whenever there will be an extended period of portant when installing your washer in a newly constructed or non-use. © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. 805413R1...
  • Page 13: Risers

    3. Standpipe 2 in. [51 mm] or 1-1/2 in. [40 mm] 6 ft. [1.8 m] 6.31 [23.9] 7 ft. [2.1 m] 4.89 [18.5] Figure 9 © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 14: Gravity Drain Models - Connect Drain Outlet To Drain System

    W306 from inside of the washer. 1. Position unit so it has sufficient clearance for installation and servicing. © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. 805413R1...
  • Page 15: Supply Injection Models Only - Connect External Supplies To Washer

    Any injection system pump which requires 110 VAC must be powered by a separate external power source. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 16: Control Function Test

    © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT Part No. 805413R1...
  • Page 17: Check Installation

    When washer spins at high speed, verify that it is stable. e. If it is not, after cycle is complete, refer to Position and Level the Washer to readjust leveling legs. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 18: Operation

    MAL/COLD, PERM PRESS/WARM or DELICATES/COLD cycle. Light indicates selection. NOTE: Changes can be made to Fabric Selector setting up until the first fill is complete. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 19: Insert Coins Or Card

    Start Washer moving parts have stopped. 1. After vend price has been satisfied, push the START pad. W092 2. Door must be closed to start washer. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 20: Maintenance

    To prevent damage while moving the unit, the shipping materials MUST be reinstalled. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 21 8. Tighten bolt while pressing washer against rear panel to en- sure spacer is fully inserted. FLW2296N_SVG 1. Shipping Brace Figure 23 FLW2297N_SVG 1. Shipping Bolt Assembly Figure 24 © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 22: Troubleshooting

    Refer to the Installation instructions to make sure that the drain hose has been proper- ly installed. • Foreign object trap in pump may be clogged. Clean the trap. Refer to Maintenance section. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 23 “H” on the valve bracket) and cold faucet is connected to cold mixing valve (indicated with “C” on the valve bracket). • Make sure laundry room water heater is adjusted properly. © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 24: Contact Information

    20 54 for the name and address of the nearest authorized parts Date Purchased ______________________________ distributor. Model Number ______________________________ FLW2305N_SVG 1. Serial Plate Figure 25 © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...
  • Page 28: Installer Checklist

    Non-Gravity Drain Plug In the Washer. Models - Connect Drain Hose to Drain Receptacle. CHECK CHECK FLW2338N_SVG1 D254I_SVG Refer to the manual for more detailed information © Part No. 805413R1 Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT...

This manual is also suitable for:

Ufne5bjp113tw01

Table of Contents