Daewoo DCR-9120 Owner's Manual page 50

To Record From DVD To Videotape during DVD playback
1
Press [DVD] button of remote control to change into DVD mode.
Insert the desired DVD disc.
When it is a DVD disc with copy protect function, you can't copy it.
Insert a recordable tape.
2
Play the DVD disc and press [REC] button.
DVD plays and VCR starts recording.
3
To exit copy, press [ ] button.
Also it stops automatically when DVD playback is finished or recorded tape is reached to the
end.
* When the disc sets DTS 5.1Ch in audio mode, you can't copy it.
If you want to copy it, set audio mode to Dolby Digital 5.1Ch or Dolby Digital 2Ch.
This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
One Touch timer Recording (OTR)
When your urgent business happens suddenly in watching TV or you want to record the current TV program for the
desired time, follow the procedures below.
1
First, follow the steps 1 to 4 in "Recording With VCR".
2
Press [REC] button as much as you want. See the "Recording Times Table" below.
Once .............. continuous recording until you press STOP button
Twice ............. recording for 30 mins from current time
3 (times) ......... recording for 1 hour
9 .................... recording for 4 hours
22 .................. returning to the status of Once Press
3
To stop Recording mode, press [ ] (STOP) button more than 5 seconds.
Recording
49