Table of Contents
Advertisement
Before doubting about troubles (VCR)
Symptom
• "Power On" does not work.
• It does not work even in "Power On".
• A videotape is not inputted in.
• On inputting a videotape, the tape is re-
ejected.
• A videotape is not ejected.
• A channel on video and a play screen
does not appear.
• Noise (screen noise) appears on screen.
• Noise appears on screen after recording.
• While in playing, noise appears.
• Sound and screen are irregular.
• Sound comes out but screen does not
appear.
• Screen is irregular and stripes appears.
• "Screen Error" message is displayed in a
screen.
• While recording and playing, the top of
screen extremely waves.
• A screen is not clear.
66
Checks
Please check whether a power plug is inserted in an electric outlet.
Please check whether a videotape is inserted in.
Try to insert a plug again.
Please check whether a power plug is inserted in an electric outlet.
Please check whether a videotape is in.
Please check whether a videotape is inserted in a right direction (a side of
transparent window should be on the upside)
Have you inputted a videotape again just after the tape was ejected? Please try
it again after fully ejecting it.
When a videotape forces to be ejected, the tape may not be inputted. In the
case, please pull out an outlet, and then push the tape smoothly.
That's why a safe mode to protect a videotape is operated automatically.
Please pull out the tape and input it again.
In case the product is used for a long time, a videotape may not be ejected for
a film inside may be stretched. In the case, please pull out a power plug for
about 10mins and then press [EJECT] button.
Please check your antenna's connection.
TV channel should be fixed on video channel .
Please check your antenna's signal whether it may be weak. In case of its
weakness, please use a frequency amplifier connected with the device.
Press [TV/VCR] and then let "VCR" is displayed on the display panel.
While in no use of VCR, was it turned on?
While in recording a program, do you watch another channel?
Select TV by pressing [TV/VCR] button on remote control.
While in playing a videotape, there may happen some noise or blot in the part
of the beginning of a videotape or resuming "PAUSE", which are not
breakdown.
Please press [TRACKING +/- ] for better screen. Videotape may be poor. Try to
change it to another one.
Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
Since VCR Play signals are not stable like a TV signals, screen may be unstable
or curved while in playing. To fix the problem, please horizontal adjustment.
In case videotape is the one recorded by other products or old one, stripe may
appear on the screen.
Try to adjust the screen by [TRACKING+/–] button.
Try to use a head-cleaner.
Advertisement
Table of Contents
