Daewoo DCR-9120 Owner's Manual page 52

NORMAL TIMER RECORDING
For timer recordings, clock, date, and stations must be set correctly.
Load a cassette with its safety tab in place and with sufficient free space for the recording.
Call the player's "SETUP", choose "TIMER PROGRAM".
Decide if you want to record "ONCE", "WEEKLY" or "DAILY"...
1
... and confirm.
Type in one after the other:
• The programme location number;
2
• the time the broadcast starts,
• the time the broadcast ends,
• the day of the broadcast, if it is not today.
• Select LP if you wish to make a very long recording .
• Switch off VPS/PDC here if you need to .
If you wish to make changes:
Move to the position you want to change using the [œ/√] buttons.
3
Change the setting using the [.../†] or [number] buttons.
If all setting are ok, press [œ or √], till you see "OK : CONFIRM" in
the bottom line.
Confirm.
Switch your player off.
• Wait a few seconds after typing a one-digit-number.
• If you have made a mistake, move to the position you want to change using the [œ/√] buttons and
change the setting.
• If programme timings overlap, the machine will give a warning message. If you don't adjust the times, the
machine will record the first programme completely then continue with the second one.
• If there is no sufficient free space for the recording on the cassette the video switches automatically to
"LP" for double recording capacity.
• The recorder will eject cassettes which have the safety tab removed.
Timer Recordings
HOW OFTEN DO YOU WANT
TO RECORD THIS PROGRAM?
ONCE
WEEKLY(ONCE A WEEK)
DAILY(MON-FRI)
DAILY(MON-SAT)
DAILY(MON-SUN)
.../†:SELECT
OK:CONFIRM SETUP:END
TIMER PROGRAM (ONCE)
PR --
START TIME --:--
END TIME --:--
START DATE --/--
TAPE SPEED SP
VPS/PDC ON
.../†:SELECT (AV1/AV2)
0-9 :SETUP(PR)
œ/√:
CORRECT SETUP:END
TIMER PROGRAM (ONCE)
PR 01
START TIME 18:10
END TIME 20:30
START DATE 20/06(FRI)
TAPE SPEED LP
VPS/PDC ON
.../†:SELECT(AV1/AV2)
0-9 : SETUP (PR)
œ/√:
CORRECT
OK:CONFIRM SETUP:END
51