Identification Of Controls - Daewoo DCR-9120 Owner's Manual

Identification of Controls

Front panel
!
^ &
! Power (STANDBY/ON) button
Use to power the device on/off if AC power supply is
connected.
@ Place to insert videotape
Insert the desired tape.
# Eject button
Use to eject the tape.
$ Disc tray
% Open/Close Tray button
Open or close tray by pressing [OPEN/CLOSE] button.
Place a disc on the disc tray, label side up.
^ Video / Audio input jack
Connect a cable coming from the video/audio out jacks
of a camcorder, another VCR, or an audio visual source
here.
& Playback/PAUSE button
Playback videotape or disc. Press this button to pause a
screen.
* Stop/MEMORY button
Use to stop playing a tape or disc. Use to memory radio
stations.
( Tuning & Search –/+
Search- (œœ ): Use to rewind currently being played
videotape or disc; or to playback back rapidly.
Search+ (√√): Use to wind currently being played
videotape or disc; or to playback rapidly.
Tuning –/+ : Scan all available radio stations.
@ #
* ( ) 1 2 3 5
) Record button
Record a programme from TV or other sources (except
DVD).
1 Operation Display Window
Display operation of device. For more information, see
"Operation Display Window" in the next page.
2 VHS/REC indicator
Illuminate in VCR mode.
3 DVD indicator
Illuminate in DVD mode.
4 VCR/INPUT button
Use to change into VCR or other output mode.
5 DVD button
Use to change into DVD mode.
6 FM/AM button
Use to change into RADIO mode.
7 PR & Preset – / +
Used to select the memorised TV broadcasting program
or radio stations.
8 SOUND FIELD button
Use to adjust the Sound Fields.
9 Volume control
Change the loudness of the sound from the speakers
connected to the unit.
0 Headphone jack
$ %
4 6 7 8 9 0
7