Setting Up Your Player - Daewoo DCR-9120 Owner's Manual

Setting up your player

Before you start, unplug all the equipment from the mains supply.
(Option 1) - Connecting your player through RF lead
200-240V~ AC
50/60Hz
(Option 2) - Connecting your player through SCART lead
Television
200-240V~ AC
50/60Hz
Back view of your player
With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the [TV/VCR] button on
the remote control, your TV will automatically display the CH ARD. "VCR" will be displayed.
In this mode, to change the viewing channels the [PR/PRESET] buttons on the player remote need to be used. To switch off this
mode press [TV/VCR] on the remote control, TV remote can now be used as normal. You will get better pictures and sound
quality if you connect your player with a scart lead.
12
Television
Back view of your player
Scart lead (not supplied)
Aerial
The type of aerial you should
use, depends on local
interference and how far you
are from the transmitter. You
should contact a local
retailer if you have any
questions about your aerial.
Aerial