Connecting Your Player With A Rf Lead - Daewoo SG-9J00 Instruction Manual

DC-G8J21D-RR/O 2008.5.19 2:16 PM ˘ ` 12

Connecting your player with a RF lead

To enable you to set up your new DVDP+VCR, it must be connected it to your TV using either a
COMPONENT cable or a COMPOSITE and associated AUDIO cable.
I Before you start, unplug all the equipment from the mains supply.
(Option 1) - How to connect with RF lead
(Use this function if you do not have AV cable or if your TV does not have AV inputs.)
OUTSIDE ANTENNA OR
WALL ANTENNA OUTLET
Aerial
The type of aerial you should use,
depends on local interference and
how far you are from the
transmitter. You should contact a
local retailer if you have any
questions about your aerial.
¡
Remove circular cable (RF cable) plugged in "ANT.IN" jack in rear panel of TV. Connect the cable to
"ANT IN" jack in rear panel of DVD-Video.
™
Connect "ANT OUT" jack in DVD-Video with "ANT.IN" jack in TV with RF cable.
12 12
REAR PANEL OF TV
REAR PANEL OF DVD-VIDEO
ANT IN
RF CABLE
INPUT 1 INPUT 2