Chapter 4 Configuring Your Server - NEC Express 5800/120Eh N8100 SERIES User Manual

Chapter 4
Configuring Your Server
Configuration and setup utilities are used to change your system configuration. You can configure
your system, as well as option boards you may add to your system, using the BIOS Setup utility.
Several unique system parameters are configured using the BIOS Setup utility, which is stored in
the system FLASH memory.
If your system has been factory configured, the BIOS Setup utility or RAID Configuration Utility
do not need to be run unless you want to change the password or security features, add certain types
of option boards or devices, or upgrade your mother board.
This chapter also provides information on several system configuration parameters that are set by
jumpers on the system board. However, these parameters do not usually require change.
Use NEC EXPRESSBUILDER CD-ROM to create the device driver diskettes.