NEC Versa S900 Disassembly Manual page 17

perform the next steps:
1. Remove the screws holding the versa bay shield in place (Fig. 30 ).
2. Lift the shield out of the system and put it aside.
3. Remove the screw holding the AC socket and take the socket holder out of the system.
4. Remove the two Hex bold screws next to the VGA port.
5. Carefully lift up the main board and put it aside.
Note: You can remove the wireless LAN button if it is in your way while removing the main board.
Fig. 30 Removing the Versa Bay shield
Fig. 31 Removing the AC socket holder
Fig. 32 Removing VGA port screws
NEC Versa S900 Disassembly Manual Page 17