Preparation For Operation - NEC Storage Manager User Manual

Chapter 1 Installation Procedure
1 . 8
1 . 8
1 . 8
To operate the system in the Replicate state, take the following steps and re-synchronize (Replicate).
The following procedures are not required when the systems are operated separately.
Step 1. Executing RV file system flush
Flush RV file system and write the unwritten data in file system buffer onto disk.
iSMrc_flush –drv H:
Then, the following message appears and the data is flushed.
Flush Start
Flush Normal End
Step 2. Executing RV unmounting
Unmount RV and cancel association between volume and file system.
When the RV is unmounted, the mount point (drive letter or NTFS folder name) set for the volume is
automatically deleted. On Windows 2000, the RV access restriction is changed to Not Ready.
* Set NOTREADY for the UMOUNT_RVACC parameter in the replication operation option setting
file to suppress automatic RV mounting before operation.
When executing unmounting, all application software, that may access the drive, must be terminated in
advance.
Refer to descriptions about unmounting Chapter 3 "Notes" also.
iSMrc_umount –drv H:
Then, the following message appears and the RV is unmounted:
iSMrc_umount: Info:
(\\?\Volume{37d84cca-2507-11d5-a0f7-00004c714491}\) has succeeded.
Umount Start
P r e p a r a t i o
P r e p a r a t i o
P r e p a r a t i o
2001/02/21 11:21:13
disk11
\\?\Volume{37d84cca-2507-11d5-a0f7-00004c714491}\
H:
2001/02/21 11:21:13
disk11
\\?\Volume{37d84cca-2507-11d5-a0f7-00004c714491}\
H:
iSM13221: Resetting drive letter (H:)
disk11
\\?\Volume{37d84cca-2507-11d5-a0f7-00004c714491}\
H:
n f o r O p e r
n f o r O p e r
n f o r O p e r
dev002
dev002
2001/02/21 11:21:14
dev002
28
a t i o n
a t i o n
a t i o n
WN
WN
WN