NEC Storage Manager User Manual page 55

Step 10. Restarting applications
The following describes the procedure for executing replication control for the RV that is can be used
as a file system through the prepared volumes:
Step 1. Terminating applications (backup server)
To maintain data consistency, terminate or halt applications and specified services that area accessing
the volume concerned.
(Example) Stopping service
NET STOP (service name)
To stop the service "ESMCommonService", specify as shown below.
NET STOP ESMCommonService
Step 2. Flushing RV file system (backup server)
Flush the file system of RV and write data in buffer of the file system which has not been written to the
disk.
iSMrc_flush –drv H:
Then, the following message is displayed and flush is executed.
Flush Start
disk11
\\?\Volume{37d84cca-2507-11d5-a0f7-00004c714491}\
H:
Flush Normal End
disk11
\\?\Volume{37d84cca-2507-11d5-a0f7-00004c714491}\
H:
Step 3. Unmounting RV (backup server)
Unmount RV and cancel association between the volume and the file system.
When the RV is unmounted, the mount point (drive letter or NTFS folder name) set for the volume is
automatically deleted. On Windows 2000, the RV access restriction is changed to Not Ready.
* Set NOTREADY for the UMOUNT_RVACC parameter in the replication operation option setting
file to suppress automatic RV mounting before operation.
Chapter 2 Operation and Maintenance
Step 11. Mounting RV
Step 12. Restarting applications
2001/02/21 11:21:13
dev002
2001/02/21 11:21:13
dev002
49
WN
WN