Saving Registered Data - NEC Storage Manager User Manual

(1) Select a logical disk you want to use as a control volume from "Candidate Volume List".
(2) Click the [Add] button.
(3) The selected logical disk is registered in "Selected Volume List".
1 . 5 . 3 S a v i n
1 . 5 . 3 S a v i n
1 . 5 . 3 S a v i n
Click the [OK] button on the Define Control Volume screen. A confirmation message appears asking
if you want to save definition information.
Figure 1-11 The definition of control volume: Saving Confirmation Screen
Clicking the [Yes] button for the message saves definition information and displays a termination
message. Clicking the [No] button displays the Define Control Volume screen again.
Figure 1-10 Registering a Control Volume
g R e g i s t e r e
g R e g i s t e r e
g R e g i s t e r e
19
Chapter 1 Installation Procedure
d D a t a
d D a t a
d D a t a