Logical Drive Creation Procedure - NEC N8103-89 User Manual

3-3. Logical Drive Creation Procedure

1.
Start FastBuild Utility.
2.
Press the [1] key on the Main Menu to activate [View Drive Assignments].
FastBuild (tm) Utility (c) xxxx-xxxx Promise Technology, Inc.
Channel:ID
1:Mas MAXTOR 6Y080MO
2:Mas MAXTOR 6Y080MO
3:Mas MAXTOR 6Y080MO
4:Mas MAXTOR 6Y080MO
[↑] Up [↓] Down
3.
Check the connection status of HDDs connected to each channel.
[Checking items]
Whether all HDDs connected to the disk array controller is recognized.
Whether the capacities of the HDDs are indicated correctly and whether all the
HDDs have the same capacity.
Whether every "Assignment" is set to "Free."
Notice
4.
After making sure that all the HDDs are indicated and connected correctly, press
the [Esc] key to return to the Main Menu.
[ View Drives Assignments ]
Drive Model
Extent 1
Extent 1
Extent 1
Extent 1
[ Keys Available ]
[ESC] Exit
If HDDs of different capacities are connected, contact your service
representative.
If a new HDD or a HDD replaced for maintenance is connected and
"Assignment" is set to "LD x-x," contact your service representative.
Capacity (MB) Assignment
80001
79933
80001
79933
80001
79933
80001
79933
97
Free
Free
Free
Free