Starting And Menus Of Fastbuild Utility; Starting Fastbuild Utility - NEC N8103-89 User Manual

2. Starting and Menus of FastBuild
Utility

2-1. Starting FastBuild Utility

When the POST screen shown below appears, press the [Ctrl] + [F] keys to start FastBuild
Utility.
[POST screen image (no setting of logical drive)]
FT SX4100 (tm) BIOS Version x.x.xxxx.xx
(c) xxxx-xxxx Promise Technology, Inc. All rights reserved.
Installed ECC DIMM: 64M
No Array is defined...
Press <Ctrl-F> to enter FastBuild (tm) Utility...
Notice
During POST, do not press any keys having no relation to the operation
such as [Pause].
87