Advertisement
•
For convenience, the IP address of the PC you are now using should already appear. If
this is not the PC whose MAC address is to be used, enter that PC's IP address.
•
Some ISPs will register the Ethernet MAC address of the network interface card in
your PC when your account is first opened. They will then only accept traffic from the
MAC address of that PC. This feature allows your router to masquerade as that PC by
using its MAC address.
Click on Finish.
10.
Click on the NETGEAR website address to test your Internet connection.
11.
If the NETGEAR website does not appear within one minute, refer to
"Troubleshooting".
Your router is now configured to provide Internet access for your network. When your router and
PCs are configured correctly, your router automatically accesses the Internet when one of your
LAN devices requires access. It is not necessary to run a dialer application such as Dial-Up
Networking or RoadRunner Login to connect, log in, or disconnect. These functions are performed
by the router as needed.
To access the Internet from any PC connected to your router, launch a browser such as Microsoft
Internet Explorer or Netscape Navigator. You should see the router's Internet LED blink,
indicating communication to the ISP. The browser should begin to display a Web page.
The Model RP114 Web Safe Router provides you with Web content filtering options, plus
browsing activity reporting and instant alerts via e-mail. Parents and network administrators can
establish restricted access policies based on time-of-day, web and newsgroup addresses and web
and newsgroup address keywords.
To configure these features of your router, click on the Advanced heading in the Main Menu of the
browser interface. From the subheadings shown, click on Content Filter. The tabs described below
contain the settings for content filtering.
Chapter 11,
Advertisement
