Advertisement
You can update the router software through the browser or by using an FTP program. The browser
procedure is described in
following section.
You can update the router software over the LAN or WAN using an FTP client program. Windows
includes an FTP client program that can be accessed using the Start button and Run menu. Other
FTP client programs are available through many software retailers and shareware sites.
To update the router software:
No login name is necessary. The password is the current Manager password. The factory
default password is 1234.
After the data transfer is finished, the router programs the upgraded firmware into flash memory
and reboots itself, dropping the FTP session.
To enter the command interpreter mode:
This mode allows you to diagnose, test, and configure your router using a specified set of
commands. To see a list of valid commands, type "help" at the command prompt. For more
detailed information, go to the NETGEAR Web site,
"Software Upgrade" on page
6-4. The FTP procedure is described in the
Advertisement
