Advertisement
–
Powerful packet filtering capabilities
–
Incoming port forwarding and DMZ for specific services
•
Built in 4-port 10/100 Mbps Switch
–
Allows LAN connections at 10 megabits per second (Mbps) or 100 Mbps
–
Autosensing for Ethernet (10BASE-T) or Fast Ethernet (100BASE-Tx) transmissions
–
Auto Uplink
connection
–
Half-duplex or full-duplex operation
•
Ethernet connection to a wide area network (WAN) device, such as a cable modem or DSL
modem
–
RJ-45 interface allowing connection to a 10BASE-T device
•
Protocol Support
–
IP routing
–
Dynamic extended Network Address Translation (NAT+) with port forwarding for
operation with a single static or dynamic IP address
–
Dynamic Host Configuration Protocol (DHCP) server for dynamically assigning
network configuration information to PCs on the LAN
–
DHCP client for dynamically obtaining configuration information from the Internet
Service Provider (ISP)
–
DNS Proxy for simplified configuration
–
PPP over Ethernet (PPPoE) support
•
Login capability
Automatically executes user login for
–
RoadRunner cable modem service,
–
PPP over Ethernet accounts, PPTP login (for European service providers)
–
BigPond service (for Telstra Australia)
•
Easy installation and management
–
Easy, web-based setup for configuration of most features
–
Built-in Manager interface for configuration of advanced features, accessible by
Telnet Protocol
(autosensing MDI/MDIX) configures each port for normal or uplink
TM
Advertisement
