Download Print this page

NETGEAR RP114 Reference Manual page 129

Web safe router
Hide thumbs Also See for RP114:

Advertisement

If your router can obtain an IP address, but your PC is unable to load any web pages from the
Internet:
Your PC may not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the router's configuration, reboot
your PC and verify the DNS address as described in
on page
3-4. Alternatively, you may configure your PC manually with DNS addresses, as
explained in your operating system documentation
Your PC may not have the router configured as its TCP/IP gateway.
If your PC obtains its information from the router by DHCP, reboot the PC and verify the
gateway address as described in
Most TCP/IP terminal devices and routers contain a ping utility that sends an echo request packet
to the designated device. The device then responds with an echo reply. Troubleshooting a TCP/IP
network is made very easy by using the ping utility in the built-in Manager interface (Menu 24.4)
or in your PC or workstation.
You can ping the router from your PC to verify that the LAN path to your router is set up correctly.
To ping the router from a PC running Windows 95 or later:
You should see a message like this one:
If the path is working, you see this message:
"Verifying TCP/IP Properties (Windows)"
"Verifying TCP/IP Properties (Windows)" on page
3-4.

Advertisement

loading