Table of Contents
Advertisement
2525252525
Note: In
Fig.
41, the screws in each of the lower corner are covered by cables.
3. Carefully pry open the LCD bezel; it has been clicked into place.
Inverter Board
To remove the inverter board, first remove the LCD bezel (see
do the following:
1. Disconnect the cable on both ends of the inverter board.
2. Remove the screw securing the inverter board (see
3. Extract the inverter board.
LCD Panel
To disassembly the LCD panel, remove the LCD bezel (see
perform the following steps:
1. Disconnect the cable on both ends of the inverter board (see
2. Remove the two screws securing the top bracket and remove the bracket.
Fig. 42 Location of inverter board.
Fig. 43 Location of bracket screws.
Packard Bell EasyNote MT Disassembly Manual
LCD Bezel
on page 24), and then
Fig.
42).
LCD Bezel
on page 24), and then
Fig.
42).
25
Advertisement
Table of Contents
