Inverter Board; Webcam - Packard Bell EasyNote SJ Disassembly Manual

2525252525
4. Lift out the panel.
5. Remove the 4 screws on each side securing the brackets for the panel.
6. Push the clips to disconnect the LCD cable from the back of the panel.

Inverter Board

To remove the inverter board, first remove the LCD bezel (see
following:
1. Disconnect both cables from the inverter board (see
2. Remove the screw securing the inverter board and extract the board; it may be glued
onto place.

Webcam

To remove the webcam, first remove the LCD bezel (see
1. Disconnect the cable from the webcam.
Fig. 44 Removing grounding cable screw.
Fig. 45 Location of screw securing brackets.
Packard Bell EasyNote SJ Disassembly Manual
LCD Bezel), and then do the
Fig. 43).
LCD Bezel), and then do the following:
25