Table of Contents
Advertisement
Replacing the inverter board
www.packardbell.com
Tools you need to complete this task:
Flat-blade driver
Phillips #0 screwdriver
Screws removed during this task:
•
2 black M2.5×8 (LCD panel hinges - bottom)
•
2 black M2.5×8 (LCD panel hinges - top)
•
- base side)
•
3 black M2.5×8 (palm rest - top side)
•
1 chrome M2×3 (inverter board)
To replace the inverter board:
1
Complete the steps in
2
If the notebook has a wireless card installed, follow
"Replacing the wireless card" on page
3
Remove the keyboard by following the instructions in
keyboard" on page 77
4
Remove the keyboard cover by following the instructions in
keyboard cover" on page
5
Remove the LCD panel assembly by following the instructions in
the LCD panel assembly" on page
6
Remove the LCD front panel by following the instructions in
LCD front panel" on page
7
Remove the 1 screw securing the inverter board.
- OR -
"Preparing the notebook" on page
58.
.
79.
83.
116.
Scribe or non-marring tool
13 M2.5×8 black (palm rest
51.
step 1
to
step 4
"Replacing the
"Replacing the
"Replacing
"Replacing the
in
119
Advertisement
Table of Contents
