Webcam/Microphone - Packard Bell EasyNote MT Disassembly Manual

2626262626
3. Remove the ten screws securing the side brackets (five screws on each side) and remove
the brackets (see
4. Separate the LCD panel from the back cover.
5. Disconnect the LCD cable.
6. Remove the side brackets (four screws on each side) from the LCD panel.

Webcam/Microphone

To remove the webcam and microphone, first remove the LCD panel (see
and then do the following:
1. Disconnect the cable from the header on the module.
2. Carefully remove any adhesive tape securing the module (see
3. Extract the webcam/microphone module.
Fig. 43).
Fig. 44 Location of LCD cable connector.
Fig. 45 Location of webcam connector.
Packard Bell EasyNote MT Disassembly Manual
LCD Panel on page 25),
Fig. 45).
26